LSI MegaRAID SAS 9286-8e Podręcznik Użytkownika Pobierz pdf (Strona 26)

LSI Corporation

- 26 -

6Gb/s MegaRAID SAS RAID Controllers User Guide

August 2012

Chapter 2: MegaRAID SAS Hardware Installation

SAS Device Cables and Connectors

Figure 7 Connecting the MegaRAID SAS 9260-8i RAID Controller to a Drive

2.5.2 Connecting a RAID Controller with External Connectors to a Drive Enclosure

This section provides step-by-step instructions for connecting a MegaRAID SAS RAID controller with external SAS port

connectors to a drive enclosure containing SAS drives, SATA drives, or a combination of both drive types.

Follow these steps to connect the cable from your controller to a drive enclosure.

1. Connect the connector on one end of the cable to external port J1A4 or J1B1 on the MegaRAID SAS 9280-8e RAID

controller, as shown in the following figure.

2. Connect the other end of the cable to the external port on the drive enclosure.

NOTE The MegaRAID SAS 9280-8e RAID controller is shown as an example. You can connect other SAS

controllers with external SAS port connectors in the same way.

HDD

Connector

Power

Connector

85039-06

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 91 92

Brak uwag

LSI MegaRAID SAS 9286-8e Podręcznik Użytkownika Strona 26