LSI 9690SA-8E-KIT Przewodnik Instalacji Pobierz pdf (Strona 118)

Chapter 2. CLI Syntax Reference

110 3ware SATA+SAS RAID Controller Card CLI Guide, Version 10.2

/cx/ex/fanx set identify=on|off

/cx/ex/fanx set speed=<0|1|2|3|4|5|6|7>

/cx/ex/pwrsx show

/cx/ex/pwrsx show identify

/cx/ex/pwrsx set identify=on|off

/cx/ex/tempx show

/cx/ex/tempx show identify

/cx/ex/tempx set identify=on|off

/cx/ex/almx show

/cx/ex/almx set alarm=mute|unmute|off

/cx/ex show

The /cx/ex show command applies to 9750 and 9690SA controllers. For the

9650SE and CCU enclosure, simply drop the prepended controller name in

the command and use /ex.

The /cx/ex show command shows summary information on the specified

enclosure /cx/ex. This report consists of several parts, depending on the

available elements of the enclosures. Typically, the summary consists of the

Enclosure section listing the set of enclosures, a Fan section, a Temperature

Sensor section, a Power Supply section, a Slot section, and an Alarm

section.

Example:

//localhost> /c0/e0 show

Encl Status

---------------------------

/c0/e0 OK

Fan Status State Step RPM Identify

------------------------------------------------------------

fan0 OK ON 1 2670 Off

fan1 OK ON 1 9500 Off

fan2 OK ON 1 8540 Off

fan3 OK ON 1 2830 Off

fan4 OK ON 1 9120 Off

fan5 OK ON 1 8330 Off

TempSensor Status Temperature Identify

--------------------------------------------------------

temp0 OK 41C(105F) Off

temp1 OK 38C(100F) Off

temp2 OK 34C(93F) Off

temp3 OK 38C(100F) Off

temp4 OK 38C(100F) Off

temp5 OK 34C(93F) Off

temp6 NOT-INSTALLED - Off

temp7 NOT-INSTALLED - Off

PowerSupply Status State Voltage Current Identify

---------------------------------------------------------------------------

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 137 138

Komentarze do niniejszej Instrukcji

Brak uwag

LSI 9690SA-8E-KIT Przewodnik Instalacji Strona 118

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Kontrolery RAID LSI 9690SA-8E-KIT